Exciting challenge
Developing Nadal Series is always an attractive prospect, which means that ambitious pursuit of continuous technical improvements, while maintaining the aesthetics of shopping watch by providing new materials such as Carbontpt® Series and new colors.
Released by RM 35-01, RM 35-02 appears in the request of Richard Mille customers, which require Nadal movements of the heart of the Nadal movement.
Move RMAL1
A hollow automatic upper chain head with hours, minutes, seconds and variable geometric shaped rotors.
5-stage titanium matrix and bridge
Like the previous product, RM 35-02 Rafael Nadal, Rafael Nadal, concomings, continuously pursuing the results of unique design innovation.
The bottom plate and the bridge use 5 wet spray titanium metal, treated and stretched with PVD / Titalyt® to ensure the highest rigid and impeccable smooth surface.
The backbone-based flooring and bridges have been widely validated to ensure they meet stringent strength requirements. Therefore, RM 35-02 can withstand the acceleration of up to 5,000 g.
Variable geometric rotor
The emergence of RM 35-02 is the requirements of a number of Richard Mille customers, and automatic upper chain mechanism is equipped with the core of Nadal movements. Richard Mille Automatic Movement is a variable geometric rotor that uses the brand to obtain patents. This decision is self-evident.
Rotor specification
• 5-stage titanium arm
• High palladium content 18k white gold weight segment
• Screws in 5 titanium alloy can be adjusted by 6 possible locations
• Ceramic ball bearings
• Counter clockwise
Richard Mille‘s unique design allows it to accommodate the user’s activity level in the motion or non-moving environment. By adjusting the six-stage rib, you can change the inertia of the rotor so that the process of accelerating the string is accelerating in the arm leisurely, or slowing the rotation speed in sports activities.
Motion characteristics
Movement Size: 30.25 x 28.45 mm
Thickness: 4.45 mm
Quantity: 32 gun
: Adopt AP 20 Steel
Tianping: Glucydur®, 2 arms and 4 fixed screws, rotation inertia 4.8 mg • cm 2, increase angle 53 °
Frequency: 28,800 Vph (4 Hz)
游 丝: Elinvar provided by Nivarox®
Shock absorption device: incabloc 908.22.211.100 (transparent)
Gem on the escape wheel: RubiFix (transparent)
Two-position spool: manual upper chain and time setting
case
CARBONTPT® and QuartztPT® are exclusive materials with unique appearance. Their outstanding surfaces show a very rule of Damascus visual pattern because they consist of a multi-layer parallel filaments, which are obtained by dividing carbon fibers or silica gel wires.
These maximum thickness of 45 microns are impregnated by the resin and then woven on a special machine, the machine changes the fibers between the layers 45 °. These materials are heated to 120 ° C under pressure of 6 bar and then prepared on the CNC machine of the Richard Mille’s housing plant.
In another first creation in the Nadal series, the bottom cover uses sapphire crystal glass for anti-reflection treatment, so that the caliber can be enjoyed from all angles.
The outer casing of replica RM 35-02 is 50 meters, which is sealed by two nitrile O-ring. The case is equipped with 20 5th-stage titanium lane screws and 316L stainless steel wear-resistant washers.
Free spring balance with variable inertia
This balance represents the ultimate goal of innovation. It guarantees higher reliability during the impact and during the movement assembly or removal, so the timing is better over time. The regulator index is eliminated, and more accurate and repeatable calibration can be performed due to four adjustable small weights directly on the balance.
Double barrel system
Double barrel systems help to increase torque stability over a longer period of time. This is achieved by assigning the stored energy into two rather than a spring box, which increases the number of revolutions and reduces the pressure on the teeth, bearings, and pivots, thereby obtaining better long-term performance.
5-level titanium spline screw for bridge and housing
This can better control the torque applied to the screw during assembly. Therefore, these screws will not be affected by physical operations during assembly or removal, and can be well aging. www.moonphase-watch.com
